Blog

We are coming back with a little summer tips! Star of the season: metal fence/wrought iron fence!

08.06.2018

An iron fence adds elegance and style to your home and garden. However, it is constantly exposed to atmospheric factors, which leads to surface damage.So we help you with surface preparation tips and our new QTEK 3 in 1, on rust directly!
 

QTEK 3 in 1, directly on rust, is triple-layer enamel: corrosion inhibitor, anticorrosive primer, decorative and protective coating. Yes, just as you see: no need to apply a primer before painting because the new QTEK 3 in 1 has anti-corrosion properties that inhibit rust and its appearance.
Let's talk a little about the proper surface preparation. To begin with, remove any cracked, peeled and rusted paint with a wire brush or medium abrasive paper. Degrease the surface with thinner D506, then wipe the iron with a clean, dry cloth. Be careful not to work in direct sunlight and temperatures above 30°C!


Finally, you only need a brush, roller or spray gun. The QTEK 3in1 enamel is applied in 2 layers over an interval of up to 4 hours between layers. Now that we have the surface properly prepared, let's see what surface effect suits you.
QTEK 3in1 is developed with 3 surface effects: gloss, wrought iron and hammer blow. The effect of hammer blows can also be achieved by brushing.
One important thing is to decorate the entire fence in one day. If you work on sections there is the risk that some portions of the fence look faded.

We offer you to choose from 9 shades: 4 glossy colors (white, green,  brown, black), 3 colors for hammer blow effect (silver, brown, black) and 2 colors wrought iron effect.
And now let's get started!

NEWSLETTER
SUBMISSION
* In accordance with the GDPR, applicable from May 25, 2018, subscription involves
your explicit consent to the processing of your data for own purpose, for sending newsletters.
Contact Information
Constructorilor Boulevard, No. 1-3, Timisoara 300571, Romania
tel: 0040-256-222139
fax: 0040-256-222179