EVRIKA Fast drying enamel

EVRIKA fast drying enamel is designed for the interior and exterior of buildings – for painting metallic, wood or masonry surfaces, industrial machines and equipment. Product has resistance to water, mineral oil, temperature differences and UV radiations. Used in system with the anticorrosive primer EVRIKA provides long lasting protection to metallic surfaces it was applied on.


  • Fast drying - 30 minutes!
  • High covering power
  • Provides resistance to weathering and wear
  • Super glossy
  • Water and mineral oil resistance
  • Good support adherence
  • Easy to applay
  • Provides long lasting protection


1-2 coats with brush, roll or with spraying gun. Thin product before application with D506, max. 5%, based on product viscosity and application method.

SPREADING RATE: 13 sqm/l/coat
DRYING TIME: 30 min. at dust, 6 hours in handling at 21 °C
PACKING: 0,75l; 2,5l and 20 Kg

RELATED PRODUCTS anticorrosive primer EVRIKA and  thinner D506


Technical data sheet: TDS271 EVRIKA Fast drying alkyd enamel S5002.pdf






* In accordance with the GDPR, applicable from May 25, 2018, subscription involves
your explicit consent to the processing of your data for own purpose, for sending newsletters.
Contact Information
Constructorilor Boulevard, No. 1-3, Timisoara 300571, Romania
tel: 0040-256-222139
fax: 0040-256-222179